Cars with automatic gear shifting are increasingly in demand. Driving such a vehicle is not difficult, but it is important to know some of the subtleties of how to properly drive an automatic vehicle. This will avoid breakdowns and other troubles. Automatic driving lessons explain in detail how to do this.
How to start a car with automatic transmission
Start the car in the position of the lever P, you can N. If the car does not start, then one of the reasons is that the lever is installed incorrectly. Features of how to start with an automatic transmission:
- It is important to warm up the car. At temperatures above 0 0 C, in order to distribute the oil evenly, the engine must warm up for 2 minutes; at sub-zero temperatures, it will take 10 minutes. In winter, the transmission is also warmed up. To do this, turn on mode D and press the brakes for 20-30 seconds, then switch to mode R – 30 seconds. The procedure is repeated a couple of times, after which the gas is squeezed out a little when installing the car on the handbrake.
- Activate one of the established modes. To do this, switch the lever until there is a slight push. (It is important to remember that if there is no push and you squeeze the gas, then such actions will result in a breakdown).
Therefore, in order to avoid trouble, it is important to do everything right. If the engine breaks down, it is not difficult to fix it, but there will be problems with the automatic transmission. It is not difficult to master the subtleties of how to start a car automatically; with time, experience will come in this matter.
How to drive off with an automatic transmission
The rules for driving an automatic transmission are not complicated. To do this, first press the brake all the way and move the control lever from mode P to D or R (when moving backwards). Next, lower the handbrake and slowly release the brakes, the car will begin to move. To add speed, you can smoothly press the gas. It is important to remember that you only need to operate the pedals with one foot, so that there is no temptation to press the brakes and gas at the same time.
Changing gears on automatic transmission
The gear shift occurs automatically; the driver only has to press the gas and brake pedals. To control the operation of the transmission, a lever is used. Having studied the basic modes, you can easily learn how to correctly change gears on an automatic transmission. Here’s what driving theory says :
- P is intended for braking. At this time, the wheels are blocked while the engine is running. Use when parking or warming up the engine. You should not turn on the mode when driving or before every traffic light; it is better to use the brakes. Do not confuse the mode with the handbrake. The hand brake is more reliable.
- R (meaning reverse in English) is used to engage reverse.
- D (from the word drive – to go) is used when moving forward, and the gears are automatic driving lessons walsall. Some machines are equipped with additional modes that are digitally designated. They are used when driving on different sections of the road (off-road, icy conditions, steep slopes, etc.). There is also a designation L or B for driving at a reduced speed (it is forbidden to turn on at a speed of less than 30 km/h).
- N (the English word neutral means neutral), in which case the car can roll freely if the brakes are not applied. It is used when towing or when moving a car with the engine turned off.
- O/D allows you to use higher speeds, which are usually in the off state. The button corresponds to 5 gears on the mechanics. It is not recommended to use it regularly.
Automatic gear shifting occurs when driving, when the gas pedal is depressed, and when mode D or R is turned on. Smooth release reduces the speed of the car.
Automatic engine braking
For an inexperienced driver, operating an automatic transmission after a manual transmission can lead to some errors. It would be correct to fully press the brakes and turn on mode D before stopping the vehicle. When stopping for a long time, set the mode from P to N and you can remove your foot from the pedals after braking.
Tips on how to learn to drive an automatic car
For those who have mastered driving manual cars, learning to drive an automatic will not be difficult. The main thing is to get used to using only one leg. Tips on how to learn to drive an Automatic car lessons:
- When towing, do not exceed a speed of 50 km/h, and some cars are better transported by a tow truck.
- Drive through slippery turns only at reduced speeds and it is better to turn them on in advance.
- When parking, do not press the gas, as the movement will be jerky. You just need to slow down smoothly.
If the car is slipping, there is no point in constantly squeezing the gas. It is best to lower the speed and squeeze the brakes like a clutch. As a result, the wheels will rotate slowly.
By applying the recommendations, you can quickly learn how to drive an automatic car correctly. Then the use of such machines will allow you to enjoy comfort, as was planned by the developers.
Recommended Article: How is the first driving lesson in a driving school with an instructor: